Recently, the construction of Turkey’s 20-ton animal feed plant project has progressed smoothly. The plant has been basically completed and equipment has begun to be installed. It is expected to be officially put into production in November this year.

The client of this project is a modern agricultural enterprise with poultry production, sales and processing as the leading industries, integrating scientific research, production and trade. Since 2016, it has developed multiple poultry breeding bases using the “company + farmers” cooperation model.

At present, two large production workshops, a poultry disease laboratory and a feed analysis room have been built. Most of the mechanical equipment in the production workshop has been installed. Technicians are hoisting the scales. The comprehensive office building is being built at a rapid pace. The main roads around the factory area are hardened, and ancillary projects such as greening on both sides of the road and paving of sidewalks are also being improved.

The company has introduced complete professional instruments and equipment for poultry disease detection and feed testing. After the project is officially put into production, it can reach an annual production and processing capacity of 300,000 tons of feed, with an annual output value of about 900 million yuan.

At present, the production area of ​​this feed mill engineering project has basically completed the civil construction, and the equipment has been basically installed. Finally, the circuit installation is left. After the installation is completed, it will immediately enter the equipment debugging stage. After the debugging is completed, it will immediately start trial production. If there is no problem with the trial production, it will be officially put into production. The production area will be completed and put into production at the end of August.

On July 31, the annual production of 40,000 tons of biomass fuel pellet production line was completed and put into production in Moldova. This production line was invested and built by a local timber factory.

This biomass pellet production line is the largest single biomass fuel production line in the local area. It uses internationally advanced equipment and mature advanced technology. It uses tree branches, wood chips, crop straw and other agricultural and forestry wastes that can generate calorific value as raw materials. It can produce 7 to 8 tons of biomass pellets per hour. The products are used to replace highly polluting coal.

On July 25, at the construction site of the 50,000-ton annual feed additive project undertaken by RICHI, workers were carrying out the exterior facade construction of the building.

The project is divided into two phases. At present, the construction party is stepping up construction to strive for early production and early effectiveness of the project. The first phase of the project will build 2 workshops and 1 office building. The exterior wall of the office building is currently under construction, and the workshop equipment of the first phase project has been installed. In the second phase of the project, we plan to start building 2 workshops for the production of veterinary drugs and feed additives from mid-October, and it is expected to be completed in January 2025.

In the production workshop of the first phase of the complete feed mill plant project, the filling machine, mixer, feeding platform, dryer and other equipment are ready. After the project is fully put into production, the intelligent production of feed additives will be realized, and the production capacity of the enterprise will be greatly improved. The annual output of feed additives for this project is expected to reach 50,000 tons, and the product sales range is Ecuador, Colombia and other countries in South America.

Recently, the 3t/h Turkish biomass pellet production line project undertaken by RICHI was officially put into production. With the deterioration of the environment and the decreasing fossil resources, finding new energy has become the focus of international attention. As the main production equipment, it has achieved green transformation in the use of corporate fuel, which will be more conducive to the development of a green circular economy.

This pellet mill plant uses the most advanced equipment and is an important renewable energy and clean energy. It is of great significance in improving energy structure, promoting rural economic development, energy conservation and emission reduction, and improving air quality. It is a new type of clean energy that many countries encourage to develop vigorously. As an internationally recognized clean energy, it not only has high calorific value and thermal efficiency, but also can achieve “zero emission” during the combustion process, which minimizes pollution to the environment.

According to estimates, every 10,000 tons can replace 5,700 tons of standard coal, reduce sulfur dioxide emissions by 420 tons, reduce smoke emissions by 3,880 tons, reduce carbon dioxide emissions by 14,200 tons, and reduce nitrogen oxide emissions by 210 tons. The commissioning of this pellet line for sale Turkey project is of great significance to improving Turkey’s resource utilization, promoting the transformation of energy utilization methods, reducing coal consumption pollution to the atmosphere, and promoting the coordinated and sustainable development of Turkey’s industry and ecological environment.

Recently, the Russian 150,000 tons of feed pellet production line project, which is designed, manufactured and installed by RICHI Machinery, is in full swing…

The project will build a 6-story production building and ancillary facilities with a total construction area of ​​40,000 square meters. The project production building will be built into the largest single-unit pig farming demonstration base in Russia with the highest operating efficiency, and has a leading biosafety iron barrel prevention and control integrated system.

The project adopts unique production technology and advanced production equipment, with a reasonable layout and high production capacity, to tailor its feed production line for customers. The entire production line includes processes such as crushing, batching, mixing, and granulation, and is equipped with auxiliary systems such as ventilation and dust removal, full computer control, and air compression. The central control adopts a full computer central control system to realize the intelligent control of its production line.

The project site is supervised by the project manager of the Hexie Installation Engineering Department throughout the construction, focusing on quality, safety, and progress, to ensure that the progress of the project is safe, orderly, high-quality and efficient, and to provide strong guarantees for the customer’s continued stable production needs in the future.

RICHI Machinery was founded in 1995. It is a diversified high-tech enterprise engaged in feed machinery manufacturing research and development, production, sales and technical services, covering an area of ​​more than 100,000 square meters.

After nearly 30 years of hard work in the industry, RICHI has now become a strong brand in the field of animal husbandry machinery manufacturing. In 2010, the group’s international trade department was established, and its products are exported to more than 130 countries in Europe, North America, Oceania, South America, Africa, Southeast Asia, and the Middle East. It is internationally renowned and famous all over the world.

Recently, the first phase of India’s bio-fermented feed project with an annual output of 150,000 tons was put into production. The client of this animal feed mill plant project, a bio-environmental protection technology company, began to enter the new track of distiller’s grains biological feed in 2020, starting the transformation and upgrading of the industrial structure. During the period, it overcame many difficulties and ushered in today’s development milestone.

This annual production capacity is 150,000 tons of distiller’s grain biological fermentation feed (the first-phase product scale is 100,000 tons/year, and the second-phase product scale is 50,000 tons/year).

The first-phase project has completed the main construction, equipment installation and debugging, and successfully completed trial production. The fermentation animal feed production line project will be constructed by RICHI Machinery, with a planned total investment of no more than US$4 million (including equipment and civil construction investment).

The project is completed and put into operation, which is a milestone moment in the development of the client’s distiller’s grains biological fermentation feed business. It is also a new starting point to promote the transformation and upgrading of the client’s business structure and enter a new stage of high-quality development.

It is worth mentioning that in recent years, while the client company has accelerated the market layout of the distiller’s grains biological fermentation feed business, it has also been committed to the value development of other brewing by-products and promoted the company’s product upgrades.

In recent years, under the influence of policies, more and more feed companies have paid more attention to fields such as biological fermentation, mixed feed additives, and additive premixed feeds, and have put forward higher requirements for the core equipment “feed mixer machine” in this field.

RICHI keeps pace with the development of the industry, and based on the concepts of higher uniformity, lower residue, easier cleaning, and more stable operation, RICHI targets core feed mill equipment in the fields of biological fermentation feed, mixed feed additives, and additive premix mixer machine” has been fully upgraded.

Below we will highlight two products for you:

1. Stainless steel single-shaft paddle feed mixer

Upgrade content:

• ① Internal and external double-layer blade rotor structure – when the machine is running, multiple mixing methods such as shearing, convection, and diffusion coexist, achieving higher mixing uniformity (Cv ≤ 5%) in a short time (120 seconds);
• ②The machine is designed with a compressed air blowing system and uses an internal mirror polishing process to achieve a lower material residual rate;
• ③The bottom is designed with a full-length large door and a self-locking silicone adjustable sealing structure. The main shaft adopts a labyrinth anti-spiral + multiple packing seal combination, which ensures no material leakage during machine operation and at the same time ensures low discharge residue. requirements.

Based on the above characteristics, stainless steel single-shaft paddle feed mixers are mostly used in general conventional feed and feed additive industries.

2. Spiral propeller feed mixer

Upgrade content:

• ①The patented (ribbon + blade) rotor design ensures normal mixing of materials with a moisture content of less than 50%. When the machine is running, multiple mixing methods of shearing, convection, and diffusion coexist, and there are no dead ends in mixing to ensure that the materials are mixed in a shorter time Achieve higher mixing uniformity within;
• ②The internal mirror polishing process is adopted, and the discharge door adopts a self-locking silicone adjustable sealing structure to achieve no leakage during operation and low discharge residue;
• ③Full-open and quick-open cleaning doors + safety interlocking devices make maintenance safer, cleaning more thorough, and operation more efficient.

Based on the above characteristics, HHLJ series ribbon paddle feed mixers are mostly used in industries where the moisture content of materials such as fermented feed and fermented traditional Chinese medicine is relatively high;

RICHI Machinery hopes to move forward hand in hand with all cooperative animal feed mill plants and looks forward to your contact!

Following the stable and efficient operation of the 15t/h high-end livestock and poultry feed project in 2022, another large-scale feed processing project in Thailand tailored by RICHI Machinery was officially put into production recently! The annual output value of the entire project is expected to reach tens of millions of US dollars, solving the employment of more than 100 laborers, and will become the largest feed production base in the customer’s local area.

The customer company is an integrated agricultural enterprise integrating scientific research, production and trade, with high-quality chicken breeding as the leading industry. In order to further improve the quality of feed and breeding and realize the diversified development of the enterprise, the customer joined hands with RICHI Machinery to create this 15t/h pig feed mill project with advanced process design, energy-saving and efficient equipment, and high degree of automation to meet the production of high-quality pig feed.

In order to ensure that the nutrients in the feed are not lost, the piglets like to eat without getting angry and grow fast, the pig feed production line uses RICHI’s unique pig feed pellet technology, full nutrition rice paste, which reduces costs and maintains nutrition. It can effectively prevent viruses such as African swine fever and maximize the breeding benefits.

Advanced processing technology

• ■Adopt medium temperature soothing + low temperature granulation to maintain the activity of exogenous substances and realize the value of nutritionists’ formulas;
• ■The full ripening process of raw materials eliminates anti-nutritional factors in the raw materials, reduces the activity of urease, and the piglets do not have diarrhea when eating.

Good feed quality

• Can produce high-end piglet feed for 7-21 days old
• Comprehensive nutrition, equivalent to “full nutrition rice noodles” in infancy, piglets do not get angry when eating, and are easy to absorb;
• The pellets are comprehensive in nutrition, soft, not hard, and the whey powder is not sticky, so piglets especially like to eat.

The entire animal feed factory project uses RICHI feed mill equipment, a series of high-efficiency equipment such as grinders, mixers, and animal feed pellet making machines to provide guarantees for Lihua’s stable and efficient production.

Stable and reliable SZLH series feed mill pellet machine

• Breaking through a number of key technical bottlenecks, the whole machine efficiency is improved and the production capacity is high;
• The quality of the produced feed is good, which improves the breeding benefits;
• Complete supporting equipment, humanized operation, automatic operation, and lower comprehensive operating costs.

SFSP series crusher

• The base structure is optimized and the operation is smoother;
• Different hammer arrangement schemes can be selected for different application occasions, and the crushing fineness is better;
• The coupling structure is improved, and maintenance is faster and more convenient.

Double-shaft paddle high-efficiency mixer

• More uniform mixing, multiple liquids and solids can be added at the same time, the spraying is accurate, and the control is convenient;
• The top flip liquid addition pipeline makes it easy and quick to replace the cleaning nozzle;
• Full-length large door unloading, fast unloading speed, and extremely low residue; silicone sealing strips are used to ensure that there is no leakage during the mixing process.

In order to ensure that the task is completed on time and with quality, the RICHI delivery team strictly follows customer requirements from the early overall planning, process design, to on-site installation and commissioning, and supervises the quality throughout the process to ensure that the equipment is delivered in the best production state.

In addition to this project, RICHI has recently undertaken projects such as the Bangladesh 10t/h animal feed mill plant and the Argentina 8-ton cattle feed production line. The high quality has been highly praised by customers around the world.

The Honduras 10-ton animal feed production line project undertaken by RICHI has been completed and entered trial production, and is scheduled to be officially put into full production in August.

In the main workshop of the project, workers can be seen driving forklifts to move the freshly bagged feed to the conveyor belt, and then load it to various places.

The fully automated poultry feed production line in operation can produce 80,000 tons of poultry feed annually after it is put into operation.

The feed pellet production line is deployed by the intelligent system of the central control room from feeding, crushing, batching, mixing, discharging to bagging, realizing full process automation, which not only significantly improves the production capacity, but also improves the working environment of workers. Reduce pollution in the production process, improve the sanitation standards of feed processing, and realize environmental protection and efficiency in the whole production process.

At present, the customer has invested 570,000 US dollars to build this feed production line and supporting projects, including feed production workshops, raw material warehouses, finished product warehouses, office areas, living areas and other supporting facilities.

The production and processing technology of this poultry feed mill project adopts RICHI’s complete set of automated production equipment with high ingredient accuracy and high efficiency, strictly implements the quality management system, and comprehensively controls the product quality to ensure the output of high-quality, efficient, environmentally friendly and healthy feed products to the greatest extent, striving to develop into a local industry benchmark enterprise.

Recently, the 100,000-ton animal feed factory project undertaken by RICHI was officially completed and put into operation. This is an important supporting project for the local development of the ecological breeding industry of ruminants. The total investment is 1.2 million US dollars, covering an area of ​​3,200 square meters, and the annual output of ruminant feed is designed to be 100,000 tons.

After nearly 1 year of hard work, the 100,000-ton feed mill project in Thailand was completed as scheduled. The customer company mainly produces ruminant feed, including dairy cow feed, beef cattle feed, sheep feed, goat feed, etc., using the industry’s advanced RICHI feed mill equipment, with a daily output of 300 to 400 tons. After normal production and operation, it can fully meet the local ruminant feed supply.

After the feed mill project is put into operation, it will not only meet the feed needs of local family farms, provide services for the development of the ruminant industry in the surrounding areas, but also save costs for the company every year, and drive the development of local logistics and port economy.

In addition, after the feed mill factory is put into production, it will effectively increase the added value of the local ruminant ecological breeding industry, while reducing the feed transportation link, which is conducive to animal disease prevention and control, greatly reducing the risk of disease occurrence, and is of great significance to the safe development of the local ruminant industry.