Wooden pallets are the most traditional and popular type of pallets. Because wood is cheap, easy to process, has strong adaptability to finished products, and can be repaired, according to statistics, wooden pallets currently account for more than 95% of the entire pallet market. However, does the wooden pallet production line really have to be poplar, pine or hardwood as raw materials?

A simple and cost-effective way is to use wood processing scraps as raw materials for production, such as a production line where wood chips are dried and made into pallets. Both the supply and demand market and technical support have promoted the price advantage of wood chip pallets.

Recently, RICHI’s wood chip dryer exported to Russia has been successfully installed and tested, and has been put into production. Whether it is wood chip drying processing capacity, drying quality or energy consumption, it has met customer expectations. This is also the reason why IRHCI wood chip dryer It was sold to Russia for the fifth time. At the same time, the coal slime dryer production line project and biomass pellet production line project in Russia were also highly praised by customers.

In the wood chip production pallet production line, wood chip drying is very important. The wood chips have high moisture content, which will lead to problems such as the easy growth of borers, mold, and surface wood chips falling off the pallets. Therefore, the pallet production line not only requires a high molding rate and excellent molding quality, but also The drying quality of the wood chip dryer production line is required. The dried wood chips must be evenly dried and wetted, and the moisture content must be controlled within the standards required for pallet molding.

RICHI takes the wood chip dryer as one of its core products. After years of operation, it has formed a series of wood chip drying and molding production lines. Therefore, among the technical advantages of the production line, the environmentally friendly, low-consumption and high-intensity drying capabilities of wood chip drying are more prominent. It is also more convenient for wood chips to be dried and formed.

Recently, a wood pellet production line project with an annual output of 15,000 tons designed and manufactured by RICHI was put into operation in Malaysia.

The project has built a new 1,200-square-meter standardized workshop to build a biomass pellet production line project. The project planning and design, wood pellet equipment purchase, installation and commissioning have been completed, and construction was officially started on the same day.

The biomass turnkey wood pellet mill project mainly uses raw materials such as crop straw, sawdust, grain husks, wood chips, and wood scraps to make biomass pellet fuel to provide fuel for industrial production and residents’ lives. The project has a total investment of US$450,000 and produces 15,000 tons of material particles annually.

The commissioning of the project promotes the comprehensive utilization of local crop straws, effectively solves the problems of environmental pollution and safety hazards caused by wood processing waste, and has high ecological, economic and social benefits.

Recently, RICHI successfully signed seven small biomass pelletizing plant projects in Cuba. The products of this project will be used to bake tobacco leaves, solving the problem of farmers’ difficulty in controlling baking temperatures.

Biomass fuel is made from sawdust, bark, tobacco stems, tobacco leaves, waste wood and other waste materials as the main raw materials. After crushing, extrusion, cooling, packaging and other processes, it is finally made into environmentally friendly fuel. It has high calorific value, sufficient combustion, clean and environmentally friendly. It burns smokeless and odorless, and its sulfur content, ash content, nitrogen content, etc. are much lower than coal.

It is used to bake tobacco leaves, which not only solves the problem of alternative fuels, but also solves the problem of environmental pollution, protects ecological resources, and has an obvious effect of reducing work. , truly liberating villagers from the heavy physical labor of traditional baking and achieving the goal of reducing labor and costs.

Using biomass pellets for combustion and baking, the baking cost is 8 US dollars/house less than that of coal, and the economic benefits, social benefits, and environmental protection effects are significant.

Benefiting from the “biomass burner” and the benefits of environmental protection, energy saving, cost reduction and efficiency improvement, local farmers in Cuba are increasingly favoring new energy baking houses. This is why our Cuban customers invest in the construction of biomass pellet production lines. original intention. These 7 production lines can basically meet the usage of existing biomass burners in the customer’s area every year, achieving self-sufficiency.

In order to expand the comprehensive utilization channels of straw, the project client, a South African agricultural company, invested in this straw processing project. After active promotion, the project was officially launched on April 20, 2024. All equipment for this project was manufactured and supplied by RICHI Machinery.

The main equipment of this straw processing project mainly consists of a crusher, a turning machine, a dryer, a screening machine, a belt conveyor and a straw pellet machine. After crushing, turning, heating, screening, dust removal and granulation, the straw processing project will be completed.

The straw is processed into pellets that can be stored for a long time and are easy to transport, and are sold to other regions. This agri pellet machinery plant project solves the environmental and air pollution problems caused by random discarding and burning of crop straws that cannot be disposed of, and also accelerates the comprehensive utilization of crop straws.

After the project is officially put into operation, the daily straw processing capacity will reach 70 tons, realizing the utilization of straw as feed. After the project is in stable operation, straw pellet processing and other equipment will also be introduced to further expand straw processing and utilization channels.

Recently, the Canadian biomass straw fuel pellet production line contracted by RICHI is under construction, and the workers are full of energy to speed up the project construction progress.

At present, the crop straw fuel utilization center has completed the main construction of the management building and production workshop, and is installing and debugging the production line equipment (fuel pellet making machine, crusher, dryer, etc.). It is expected to be fully completed and put into operation before July 2024.

It is understood that the total investment of the project is US$800,000, which mainly builds production and living facilities such as production workshops, raw material warehouses, finished product warehouses, and offices, and builds a biomass fuel production line with an annual output of 30,000 tons. The biomass fuel produced is made from agricultural waste and various types of straw or weeds through dust removal, crushing, stirring, extrusion at a certain temperature, drying and other processes. It can replace coal fuel. The product has high calorific value and strength good, low pollutant content and other characteristics.

After the project is completed, it will provide jobs for the surrounding people and will also provide sustainable new energy for surrounding cities and counties.

With the deterioration of the environment and the decrease of fossil resources, the search for new energy sources has become the focus of international attention. As the main production equipment of biomass pellets, the use of pellets processed by biomass pellet equipment in corporate production has achieved green transformation, which will be more conducive to the development of a green circular economy.

The biomass wood pellet making line we provide to Mexican customers uses the most advanced wood pellet equipment. It is an important renewable energy and clean energy. It plays an important role in improving the energy structure, promoting economic development, energy conservation and emission reduction, and improving air quality.

It is of great significance and is a new type of clean energy that countries encourage vigorous development. As an internationally recognized clean energy source, it not only has high calorific value and thermal efficiency, but also can achieve “zero emissions” during the combustion process, minimizing environmental pollution.

According to estimates, every 10,000 tons can replace 5,700 tons of standard coal, reduce sulfur dioxide emissions by 420 tons, reduce soot emissions by 3,880 tons, reduce carbon dioxide emissions by 14,200 tons, and reduce nitrogen oxide emissions by 210 tons.

The commissioning of this project is of great significance to improving resource utilization in Hubei, promoting the transformation of energy utilization methods, reducing atmospheric pollution from coal consumption, and promoting coordinated and sustainable development of the local area and the ecological environment.

Recently, the fir pellet processing production line has been officially put into operation, which will become a new profit growth point for American companies in this project.

With the technical support of RICHI Machinery, this biomass wood pellet manufacturing plant was put into operation in March 2024 and currently produces 20,000 tons of biomass pellet fuel annually. Now that the fir essential oil production line is running, the fir sawdust will first refine the fir essential oil and then process it into bio-pellet fuel. The sawdust will be fully utilized for a second time, reducing the cost of raw materials and improving the overall benefits of the company.

This project uses leftovers and sawdust produced from fir processing as raw materials to refine and separate fir essential oil to prepare monomer fragrances such as cedarwood alcohol and cedarene. After extracting fir essential oil, new environmentally friendly biomass pellet fuel is produced, and forestry waste is fully utilized for intensive processing and recycling. Utilize and increase the added value of forest products.

On the basis of improving and extending the industrial chain of the “green conversion of forest wastes to prepare fir essential oils and series of spices and production of biomass granular carbon” project, the client company also fully utilized the stumps and roots after felling fir trees, turning waste into treasure, and enhance the comprehensive utilization value of forestry waste resources to a greater extent.

In recent days, the Poland 8 tons per hour organic fertilizer production line project is being accelerated.

The total organic fertilizer production plant cost is US$1.05 million (including all civil engineering and fertilizer granulation equipment investment), covering an area of 1,600 square meters. It will build a compound fertilizer production line, supporting warehouses, comprehensive office buildings and auxiliary buildings.

The project was officially signed with RICHI in the second half of last year and construction started in November. At present, site leveling, production line and warehouse construction are in full swing.

According to the organic fertilizer production project construction period, it will be completed and put into operation in May this year. After the organic fertilizer production line is put into normal operation, the total production capacity will reach 40,000 tons per year.

After the completion of the project, it will provide a solid foundation for the efficient utilization of organic fertilizers and the development of new products. The market sales will radiate throughout Poland and exported to neighboring EU countries, which will contribute to agricultural development.

The organic fertilizer production project with an annual output of 50,000 tons constructed by RICHI is about to be put into operation. The raw material used in the project is biogas residue.

The entire project mainly includes batching scales, crushers, organic fertilizer pellet making machines, dryers, coolers, screening machines, automatic packaging scales, palletizers, etc.; this new modern intensive organic fertilizer plant integrates “energy saving, smart environmental protection” The factory adopts RICHI’s advanced process design and fully automatic complete sets of high-efficiency equipment, which can effectively reduce organic fertilizer production line operating costs, increase production capacity, and comprehensively enhance the competitiveness of customer products.

We are cooperating with an American energy company this time. Its bio-natural gas project will make full use of local abundant agricultural waste raw materials, such as livestock and poultry manure, straw, etc., using “high-concentration CLAR laminar flow anaerobic fermentation + double “Drying and cooling compound microbial fertilizer” process model; raw materials are produced through anaerobic fermentation to produce biogas, and the biogas is purified to produce bionatural gas; the biogas residue after solid-liquid separation of the fermentation liquid can be used as organic fertilizer raw material into the organic fertilizer production workshop for further processing into commercial organic fertilizers are sold, with a total annual processing capacity of 50,000 tons of manure and 5,000 tons of straw, and an annual output of 50,000 tons of bio-organic fertilizers, compound microbial fertilizers, etc.; the remaining biogas slurry can be returned to the fields as liquid fertilizer.

This project not only effectively develops biomass energy, but also reduces non-point source pollution problems caused by waste, improves the ecological environment, achieves carbon emission reduction, and promotes the healthy and sustainable development of modern planting and breeding models. If you are interested in our solution, feel free to contact us for the bio fertilizer plant project cost.

The Ethiopia 10-15 t/h livestock and poultry feed production line project constructed by RICHI is about to be put into operation! This project is the largest and most advanced feed mill in the state.

The entire project mainly constructs two 1,000-ton corn steel plate warehouses, a 100-ton soybean meal warehouse, and finished product bulk warehouses. It adopts fully automated production equipment, centralized monitoring, informationized data collection, automatic temperature measurement and ventilation for storage, and bulk finished product transportation to realize the transformation from raw materials to fully automated operation from entering the factory to leaving the finished product.

This new modern intensive livestock and poultry feed factory that integrates intelligence and greenness adopts RICHI’s advanced process design and fully automatic complete sets of efficient equipment, which can effectively reduce production line operating costs, increase production capacity, and comprehensively improve feed and breeding quality. A ration that provides energy and nutrients necessary for healthy growth of cattle, sheep, and chickens.

Ethiopia’s total livestock population ranks first in Africa and tenth in the world, including 35 million cattle, 21 million sheep, 16.8 million goats, and 1 million camels. It is truly a big country in animal husbandry. However, the development of the country’s feed industry is slow, and simple powder equipment is mostly used, which seriously restricts the development of the country’s animal husbandry.

In order to further expand and strengthen the scale of the livestock and poultry industry, improve the industrial layout, and improve competitiveness, the customer joined hands with Richi Machinery to build a 10-15 t/h livestock and poultry feed processing project in Ethiopia, which is rich in agricultural resources, and make full use of RICHI’s expertise in feed equipment Professional R&D strength in the field to create a new benchmark for large-scale and intelligent feed equipment and engineering in Ethiopia!