A 1 t/h eel feed extrusion line supplied by RICHI Machinery in South Korea has completed final product verification after the customer’s main commercial formulations were tested through the complete production route.
The project was developed for a specialist aquafeed producer adding a relatively small but high-value eel feed range to its manufacturing business.
Rather than pursue maximum volume, the line was designed for controlled short-batch production, fine product adjustment and high-protein formulations.
Product Verification Focused on More Than Appearance
The customer’s review covered physical feed condition after extrusion, but also the consistency achieved after drying and downstream handling.
Eel feed formulations can contain fish meal, concentrated soybean proteins, wheat flour, starch materials, fish oil and premixes.
Those ingredients require fine preparation before extrusion if small finished products are to remain reasonably uniform.
The verification work therefore began upstream with grinding consistency and formula preparation.
Small Production Scale Supports Specialized Batch Management
The 1 t/h capacity is intentional.
The customer does not need a large commodity feed mill. It needs a production system that can handle specialized formulas without forcing every commercial run to be extremely long.
Shorter batch lengths can be useful when product sizes, protein levels or oil content change between customer orders.
This makes cleaning, formulation control and repeatable extrusion conditions especially important.
Drying Results Were Reviewed Product by Product
Different eel feed specifications were not judged under one universal dryer setting.
Changes in product dimensions and formulation can alter the amount of moisture carried out of the extruder and the way heat moves through the feed during drying.
The customer and RICHI commissioning team therefore reviewed the drying condition separately for the principal products.
Operator Adjustments Now Follow Recorded Production References
The customer’s team has received a set of operating references established during the verification runs.
These are not treated as permanent settings that can never change.
Instead, they give operators a starting point when future formulas or ingredient lots behave differently.
The fish feed production line has now completed its main product-verification stage and is moving into routine use under the South Korean customer’s production team.
For this fish feed mill project, successful commissioning was defined less by a single capacity figure and more by whether the line could repeatedly produce the specialized eel feed the customer actually intends to sell.

